246 F1-66

In the same year, because the change in the three-litre formula, Ferrari tried his hand at a smaller, lighter, albeit less powerful car in an attempt to beat the British at their own game. Thus was born the 1966 246 F1 which bore the same name as the 1958 car, referring to its 2.4-litre capacity and six-cylinders. Otherwise, however, the new, rear-engined car was completely different from its forerunner. Its general architecture followed the traditional lines for this kind of single-seater with the engine in-line with the gearbox and differential. The body lines, particularly in the nose cone area, were reminiscent of the 1956 156 from which it also borrowed some engineering solutions.

Placed in Bandini’s capable hands for the first two races of the season, it performed beautifully, finishing second at Monte Carlo, a circuit that suited its temperament, and third at Spa-Francorchamps, one of the faster circuits. However, with Baglietti at the wheel, it failed to make it round in the allotted time at Monza.

Lorenzo Bandini
Ludovico Scarfiotti
Giancarlo Baghetti


Type rear, longitudinal 65° V6
Bore/stroke 90 x 63 mm
Unitary displacement 400.79 cc
Total displacement 2404.74 cc
Compression ratio 11.2 : 1
Maximum power 183 kW (249 hp) at 8500 rpm
Power per litre 104 hp/l
Valve actuation twin overhead camshafts per bank, two valves per cylinder
Fuel feed Lucas indirect injection
Lubrication dry sump
Clutch multi-plate


Frame semi-monocoque, tubular steel chassis with riveted aluminium panels
Front suspension independent, unequal-length wishbones, co-axial springs and telescopic shock absorbers
Rear suspension independent, upper lever arm, reversed lower wishbone, twin radius arms, co-axial springs and telescopic shock absorbers, anti-roll bar
Brakes discs
Transmission 5-speed + reverse
Steering rack-and-pinion
Fuel tank capacity 169 litres
Front tyres 5.50 x 14
Rear tyres 7.00 x 14
Ferrari historical events